Complies with new FCC frequency rules.

Introducing the most affordable professional UHF wireless microphone in the world – the Acesonic UHF-2600 UHF Dual Wireless Microphone System. For the same price you would pay for a set of VHF wireless microphone system, you can get a system in UHF frequency range from Acesonic.

Acesonic's breakthrough design technology enables this UHF microphone system to operate in the newly FCC approved frequency range for less cost. Using the Acesonic UHF-2600, you'll enjoy the benefit of operating in the UHF band which will get better reception and have less interference from other systems even in more populated areas because the UHF band is less crowded than the VHF band. 

Two antennas are built-in to capture the best RF signals possible which definitely ensures your voice comes through rich and clear just the way it was meant to be heard. Added bonuses are individual volume control, and a balanced and an unbalanced output. Use it worry-free as this new system complies with the latest FCC regulations for wireless microphones.  Whether you need a wireless microphone system for lecturing, presentations or entertainment, the UHF-2600 is the most reliable and affordable solution for you.

Features

• UHF Dual-Channel professional wireless microphone system
• UHF Band Quartz lock for drift free operation
• 2 wireless handheld microphones with enhanced muting and noise reduction technology
• Individual microphone volume controls for precise vocal balancing
• 2 antennas provide clear RF reception
• Rack-mountable (2 machines are needed to fit the rack-mount)

Specifications:

• Receiver:
  • Carrier wave frequency range: UHF 619-688.85MHz
  • Oscillation Mode: Quartz controlled fixed frequency
  • Carrier Wave Stability: 10PPM
  • Sensitivity: -105dB @ sinad=12dB
  • S/N Ratio: >105dB
  • T.H.D.: <0.5% @ 1KHz
  • Image rejection: 85dB typical
  • Spurious rejection: 75dB typical
  • AF Output Impedance: 2.2KOhms
  • Max. Output:
    • Level Balanced: 0 - 400mv
    • Unbalanced: 0 - 200mv
  • Dispplay: LED Display Unit
  • Power Supply: External DC Power Supply
    • 0.35A
    • 12-18V DC
  • Output Connector:
    • 1 XLR Balanced Socket
    • Unbalanced 1/4"
  • Dimensions (mm): 420(L) x 45(H) x 195 (D)
• Transmitter (Handheld):
  • Transmitter Power: 30mW
  • Spurious emission: 40dB (with carrier)
  • Display: LED
  • Battery voltage: AA 1.5V x 2