The new P-Series Power Amplifiers deliver solid, professional-quality power in a wide range of configurations designed to suit a variety of applications. Equipped with independent sweepable high-pass and low-pass filters on each channel so you can optimize output for subwoofer or full range systems. In 4 ohmas bridged mode the P5000S delivers 2600 watts. In an 8Ω stereo application, the P5000S puts out 500 watts per channel.
Big Power with Outstanding Efficiency
The new P-Series Power Amplifiers deliver solid, professional-quality power
in a wide range of configurations designed to suit a variety of applications. In
4 ohmas bridged mode the P7000S delivers 3200 watts, the P5000S 2600 watts, the
P3500S 2000 watts, and the P2500S 1300 watts.
Those on a budget will find the lineup's high power output and affordable prices
offer superior quality without putting a strain on allotted funds. Further
savings are realized with extremely efficient operation utilizing Yamaha's
exclusive EEEngine technology, which keeps operational costs down by
significantly reducing AC power consumption and heat generation.
The Perfect Match for Your Club Speakers
The new P-Series Power Amplifiers can be used with any loudspeaker system,
but if you're using our Club Series speakers they will provide optimum power and
performance. In an 8Ω stereo application, power output per P7000S channel is 700
watts (650 watts on the 230V model), the P5000S puts out 500 watts per channel,
the P3500S delivers 350 watts per channel, and the P2500S outputs 250 watts per
channel. This wide selection lets you choose the amplifier that best matches the
power handling capabilities of your speaker system.
All four models are equipped with independent sweepable high-pass and low-pass
filters on each channel so you can optimize output for subwoofer or full range
Light Weight for Easy Transport and Setup
Look at the specifications and you'll notice that the P2500S and P3500S are
surprisingly light in weight, making transport and setup less of a chore. What
is really impressive, however, is the difference in weight per watt when you
look at the P5000S and P7000S. The use of an advanced switching power supply
makes these two models very lightweight while maintaining superior audio
To provide the most versatile connectivity possible, all four models are
equipped with Neutrik speakON* output jacks and 1/4-inch output jacks for each
channel, in addition to 5-way binding post. Balanced XLR and 1/4-inch TRS jacks
are provided for channel input.
* speakON is a registered trademark of Neutrik AG.
EEEngine (Energy Efficient Engine) Technology makes more efficient use of AC
power by reducing power consumption and heat generation without sacrificing
output power or sound quality. When power requirements are low, the system uses
a highly efficient current buffer to transparently switch input power on and off
as needed. As power requirements increase, an independently responding auxiliary
power line supplies additional power as required. Output isn't compromised
because the auxiliary power line is driven by the power supply voltage which
maintains maximum output to the speaker load.
YS Processing (Yamaha Speaker Processing) achieves optimum matching with our
popular Club Series loudspeaker systems. This special circuit optimizes output
from the power amplifier to match the characteristics of Club Series speaker
systems, resulting in extra-smooth highs and enhanced lows.
|Dynamic power; 1kHz; 20ms nonclip
|Output power; 1kHz
|Output power; 20Hz-20kHz
|Total harmonic distortion
||Less than 0.1% (20Hz-20kHz; Halfpower)
|Inter moduration distortion
||Less than 0.1% (60Hz:7kHz=4:1, Half Power)
||0, +0.5, -1dB; 20Hz-50kHz
||More than 103dB
|Residual output noise
|Less than -70dBu
||Less than -70dB
||More than 350
|Maximum voltage gain
||HPF/LPF (25Hz-150 sweepable, 12dB/Oct), YS Processing
||Line input / output ports
||XLR3-31 type /ch(balance)
TRS Phone /ch(unbalance)
|Speaker output ports
5-way binding post /ch
Phone jack /ch(unbalance)
||POWER switch ON/OFF mute; DC-fault (power supply
||Temp. detection (Heat sink temp ≥90°C), VI limiter (RL≤1ohm)
||Dual variable-speed fan
||AC120V, 230V or 240V 50/60Hz
||Music source equivalent
0dB = 0.775Vrms
Would you like to help others by submitting a review? Create an account and earn points for your reviews!