The Shure SM86 is a unidirectional (cardioid) condenser vocal microphone for 
professional use in live performance. An extremely rugged microphone, the SM86 
withstands the rigors of touring while delivering a clear, studio-quality sound.
A cardioid pickup pattern isolates the main sound source while minimizing 
unwanted background noise. The built-in three-point shock mount minimizes 
handling noise, and a two-stage pop filter reduces wind and breath "pop" noise.
Features
            
             - Condenser cartridge for 
             studio quality sound
 
             - Tailored frequency 
             response for a clear 
             reproduction of vocals
 
             - Rugged construction 
             withstands the rigors of 
             touring sound
 
             - Cardioid polar pattern 
             minimizes unwanted 
             background noise
 
             - Excellent choice for 
             stage monitors and personal 
             monitors
 
             - Built-in three-point 
             shock mount minimizes 
             handling noise
 
             - Two-stage "pop" filter 
             reduces wind and breath 
             noise
 
            
Specifications
            
             - Transducer Type
             
 
             - Condenser (electret 
             bias) 
  
             - Frequency Response
             
 
             - 50 to 18,000 Hz 
  
             - Polar Pattern
             
 
             - Cardioid 
  
             - Output Impedance
             
 
             - 150 Ohms at 1 kHz 
 
             - Recommended minimum load 
             impedance: 600 Ohms 
  
             - Sensitivity (at 
             1,000 Hz) 
 
             - Open Circuit Voltage: 
             -50 dBV/Pa (3.15 mV) 
 
             - (1 Pa = 94 dB SPL)
             
  
             - Output Clipping Level
             
 
             - 1000 Ohm Load at 1,000 
             Hz: +3 dBV (1.41 V) 
  
             - Maximum SPL (at 1,000 
             Hz) 
 
             - 1000 ohm load (1% THD): 
             147 dB 
  
             - Self-Noise 
 
             - 23 dB typical, 
             A-weighted 
  
             - Dynamic Range (1000 
             ohms) 
 
             - 124 dB (maximum SPL to 
             A-weighted noise level 
  
             - Signal-to-Noise 
             Ratio 
 
             - 71 dB at 94 dB SPL (IEC 
             651)* 
 
             - *S/N ratio is difference 
             between 94 dB SPL and 
             equivalent SPL of self-noise 
             A-weighted.
 
             
             Polarity  
             - Positive pressure on 
             diaphragm produces positive 
             voltage on pin 2 relative to 
             pin 3 of the output 
             connector. 
  
             - Power 
 
             - Phantom Supply 
             Requirement: 11 to 52 Vdc, 
             positive at both pins 2 and 
             3 
 
             - Current Drain: 5.2 mA
             
  
             - Connector 
 
             - Three-pin (XLR) 
             professional audio 
  
             - Case 
 
             - Dark gray enamel-painted 
             steel with matte-finished 
             silver colored steel grille
             
  
             - Net Weight 
 
             - Net: 278 grams (9.8 oz)
             
  
             - Environmental 
             Conditions 
 
             - Operating: -18 degrees 
             to 60 degrees C (0 degrees 
             to 135 degrees F) (relative 
             humidity >90%) 
 
             - Storage: -29 degrees to 
             74 degrees C (-20 degrees to 
             165 degrees F) (relative 
             humidity >80%) 
 
            
Would you like to help others by submitting a review? Create an account and earn points for your reviews!